Results Per Page | Showing 1-43 of 43 Results
| 1
Date Added: 12/6/18
Basic Operating Instructions for the FireLink-Series Commercial Fire Alarm System.
Posted in [User Guides]
Tags:
Date Added: 12/6/18
Adding a Remote Annunciator to the FireLink Control Panel.
Posted in [Tech Tips]
Tags:
Date Added: 12/13/18
Enabling FireLink Control Panel for Programming Downloads.
Posted in [Tech Tips]
Tags:
Date Added: 4/17/19
This example explains how to use the FireLink FACP or Gemini C-Series (GEMC) control panels as a slave Digital Alarm Communicator Transmitter (DACT) connected to a 3rd party fire alarm system. This can be done using a GEMC-32 conventional kit as a standalone fire alarm communicator, using a FireLink FACP, or by adding a GEMC-FK1 Fire keypad, a Fire input module and a second commutation path to a GEMC Burg-only application. Note: The Gemini GEMC control panel must be running firmware V84A or later.
Posted in [Tech Tips]
Tags:
Date Added: 6/4/19
How to Address a Remote Annunciator after placing the FireLink Control Panel in Configuration Mode.
Posted in [Video Tech Tips]
Tags:
Date Added: 6/12/19
FireLink Wiring Diagram (PDF of Part #LA3560).
Posted in [Wiring Diagrams]
Tags:
Date Added: 7/18/19
FireLink Wiring Diagrams, including the .DWG file (Part #LA3560).
Note: The WinZip file contains three (3) files; unzip all three files into one folder. All three files must be in the same folder to display properly.
Posted in [Wiring Diagrams]
Tags:
Date Added: 2/8/19
UL 864 (9th Edition) UL Control Units, System. UL File S3594 - Models:
FL-128FACP, FL-128FACP-A, FL-128FACP-LTEVS, FL-255FACP, FL-255FACP-A, FL-255FACP-LTEVS, FL-32FACP, FL-32FACP-A, FL-96FACP, FL-96FACP-A, FL-96FACP-LTEVS, GEMC-128, GEMC-255, GEMC-32, GEMC-96
Posted in [UL Listings]
Tags:
Date Added: 5/13/20
Integrated Fire Alarm 32 Zone Control Panel & Dual Path Communicator: FireLink Installation Instructions.
Posted in [Installation Manuals]
Tags:
Date Added: 5/14/20
To meet UL and NFPA standards, the default FireLink control panel program currently included in PCD-Windows Quickloader V6.4.5 (in the Keypad Assignments screen, Keypad Features tab) includes the following two options that should be unchecked (disabled):
• Keypad 1 Always Unlocked for User Functions
• All Keypads Unlocked For Silence, Reset and Supp.
Posted in [Tech Notes]
Tags:
Date Added: 5/12/20
Basic Operating Instructions for the FireLink-Series Commercial Fire Alarm System. Conforms to UL 864 10th edition.
Posted in [User Guides]
Tags:
Date Added: 3/5/21
FireLink Cloud Programming -- Overview.
Posted in [Brochures]
Tags:
Date Added: 3/16/21
How to program zones with your FireLink system using the Cloud Web Portal.
Posted in [Video Tech Tips]
Tags:
Date Added: 5/26/21
If a supervisory zone goes into trouble, the supervisory icon and keypad sounder will automatically reset when the trouble condition clears.
Posted in [Video Tech Tips]
Tags:
Date Added: 7/9/21
A summary of all StarLink and FireLink compliance approvals.
For a copy of a compliance certificate, simply click the link for the product of interest and you will be automatically directed to the download site.
Posted in [StarLink Certifications]
Tags:
Date Added: 3/21/22
How to wire and program a FireLink control panel from the Fire Aux Relay to a communicator input.
Posted in [Tech Notes]
Tags:
Date Added: 2/5/15
GEMC and FireLink control panel set up for elevator recall using SLC detectors and relays.
Posted in [Tech Tips]
Tags:
Date Added: 1/15/15
GEMC / FireLink control panel set up for elevator recall using the GEMC-F8ZCPIM module and the RM3008 relay.
Posted in [Tech Tips]
Tags:
Date Added: 10/16/14
Programming FWC-FSLC-EZM2 Dual Input Monitor Module in PCD-Windows Quickloader.
Posted in [Tech Tips]
Tags:
Date Added: 7/21/22
Ever since the NFPA 72 (2013) was instituted, a 6-hour Test Timer may be required to be programmed in your Gemini C-Series (GEMC), Firewolf or FireLink control panel. See this Tech Tip for programming instructions.
Posted in [Tech Tips]
Tags:
Date Added: 4/13/20
For the default FireLink program, download the .ql9 file. Note: The default PCD-Windows Quickloader password is "123".
For additional information, see the FAQ: "How do I import the default FireLink program into PCD-Windows Quickloader download software?"
-----------------------------------------------------
For the default battery calculations of the FireLink fire alarm control panel, use the Gemini C-Series (GEMC) Standby Calculation Worksheet located in our Technical Library website:
http://tech.napcosecurity.com/index.php/techlibrary/docdetails/brand_id/1/doc_id/1110
Select tab 3 GEMC Fire Only.
The "Out of the Box" factory default values are:
- One (1) GEMC-F8ZCPIM Conventional 8 Fire Zone Expander Plug in Module
- One (1) GEMC-FK1 Fire Keypad
- 71ma draw for Standby and Alarm in the Mother Board AUX PWR, with a QTY of 1 for the integrated StarLink communicator.
The Total Required Standby Battery Capacity for the "Out of the Box" draw is 8.3AH.
Note: Two sets of series 8AH or 7AH batteries are required for every FireLink installation. Other powered devices must be added to the Calculation Worksheet, i.e. smoke detectors, horn/strobes, bells, remote annunciators, etc.
Posted in [Software / Firmware]
Tags:
Date Added: 11/22/21
UL 864 (10th Edition) UL Control Units, System. UL File UOJZ.S3594
Last Updated on 2021-11-22
Posted in [UL Listings]
Tags:
Date Added: 1/3/23
Integrated Fire Alarm Control Panel & Dual Path Communicator: FireLink Installation Instructions.
Click here for a Getting Started Guide for Programming the FireLink Combination FACP / Cellular Fire Communicator.
Posted in [Installation Manuals]
Tags:
Date Added: 12/30/22
FireLink Control Unit Ground Fault Troubleshooting Instructions.
Posted in [Troubleshooting Guides]
Tags:
Date Added: 12/27/22
FireLink Addressable Programming FWC-FSLCPROGPCB Operating Instructions.
Posted in [Programming Manuals]
Tags:
Date Added: 3/2/23
How to update GEMC/FireLink control panel firmware using PCD-Windows Quickloader software:
Posted in [Video Tech Tips]
Tags:
Date Added: 3/22/23
Using the Fire Aux Relay for 24V Resettable Fire Power with the FireLink and Gemini C-Series (GEMC) control panels.
Posted in [Tech Tips]
Tags:
Date Added: 4/14/23
How to program SLC address numbers into devices and enter the SLC devices into the FireLink Cloud programming website.
Posted in [Video Tech Tips]
Tags:
Date Added: 5/16/23
FireLink Cloud Admin Guide.
A guide to FireLink Cloud administration tools. The FireLink cloud application allows a fire technician to program specific FireLink unit(s) from their smart phone or tablet.
Posted in [Programming Manuals]
Tags:
Date Added: 8/24/23
Syncing NAC Devices on the FireLink Cloud Site.
Beginning with the 1996 edition of NFPA 72, fire alarm systems that contain more than two strobes in a room or space require synchronization. Since then, all manufactures have produced Horn/Strobes and Strobes that will Synchronize.
The FireLink / GEMC control panel has a protocol to synchronize System Sensor and Wheelock devices. When using these devices, you must program the system as described in this Tech Tip for the strobes to synchronize.
Posted in [Tech Tips]
Tags:
Date Added: 9/29/23
GEMC-HSKIT1416 Smaller GEMC / FireLink Control Panel Enclosure Dimensions. WinZip file contains equivalent .PDF and .DWG files.
Posted in [Data Sheets - AHJ Submittal]
Tags:
Date Added: 9/29/23
GEMC-HSKIT1425 Larger GEMC / FireLink Control Panel Enclosure Dimensions. WinZip file contains equivalent .PDF and .DWG files.
Posted in [Data Sheets - AHJ Submittal]
Tags: