Results Per Page | Showing 1-43 of 43 Results
| 1
Date Added: 9/26/11
How to Activate the Keypad "Digital Dialer Test" with models: GEM-P816, GEM-P1632 and GEM-P1664 Control Panels
Posted in [Tech Tips]
Tags:
Date Added: 11/23/99
GEM-P1632 Version 9A Summary of New Features.
Posted in [Application Notes]
Tags:
Date Added: 12/14/06
CSFM Listing For MA3000, GEM-P3200, GEM-P9600, GEM-P816, GEM-P1632 And GEM-X255 From California Department Of Forestry & Fire Protection Office Of The State Fire Marshal Fire Engineering - Building Materials Listing Program
Posted in [Tech Notes]
Tags:
Date Added: 5/1/07
Details regarding Gemini Control Panel GEM-P1632 firmware V30B; the new address locations and new features.
Posted in [Tech Notes]
Tags:
Date Added: 8/3/11
PCD-Windows Quickloader Error Check Utility Issue.
Posted in [Tech Notes]
Tags:
Date Added: 1/6/11
Tech Note: Zones programmed for AutoBypass Re-Entry do not re-enter the system when secured (GEM-P816, GEM-P1632, GEM-P1664 (V30J or prior).
Posted in [Tech Notes]
Tags:
Date Added: 11/7/11
How To Make A Control Panel "Local Only".
Posted in [Tech Tips]
Tags:
Date Added: 12/29/11
How To Program Priority Area Arming With The Keypad.
Posted in [Tech Notes]
Tags:
Date Added: 8/9/11
Voltage Regulator Issue GEM-P816, GEM-P1632, GEM-P1664
Posted in [Tech Notes]
Tags:
Date Added: 11/12/04
GEM-P1632 / GEM-P816 Version 11 Summary of New Features
Posted in [Application Notes]
Tags:
Date Added: 9/1/08
LIBRA DXK4RF-319 And LIBRA DXK4RF-433 Keypad Installation And Program Instructions.
Posted in [Installation Manuals]
Tags:
Date Added: 5/3/12
EZM Trouble when Keypad Programming On Control Panels GEM-P816, GEM-1632 And GEM-P1664 (Version 30G, 30J).
Posted in [Tech Tips]
Tags:
Date Added: 4/10/06
Installation Instructions for the GEM-K4RF Digital Icon Keypad with Integral RF Receiver (WI1179).
Note: See addendum WI2050.
Posted in [Installation Manuals]
Tags:
Date Added: 3/3/16
TROUBLE CODES AND CONDITIONS
Listed below are the trouble codes and conditions for the Gemini GEM-P816, GEM-P1632, GEM-P3200, GEM-P9600, GEM-X255 and GEMC "C-Series" control panels.
NN = Device of zone number. Note: "E" messages not listed here are currently undefined and reserved for future use.
E01-00 – A/C POWER FAILURE
E02-00 – SYSTEM LOW BATTERY
E03-00 – COMMUNICATIONS FAILURE OVER A PHONE LINE
E04-NN – RF TRANSMITTER SUPERVISORY FAILURE
E05-NN – RF TRANSMITTER LOW BATTERY
E06-NN – RF RECEIVER RESPONSE TROUBLE
E07-00 – DOWNLOAD ATTEMPT FAILURE
E08-00 – TELCO LINE 1 FAILURE
E09-00 – SYSTEM COLD START (NO PANEL PROGRAM)
E10-NN – BURGLARY KEYPAD RESPONSE TROUBLE
E11-NN – BURGLARY KEYPAD/ ACM TAMPER
E12-NN – BURGLARY EZM RESPONSE TROUBLE
E13-NN – BURGLARY EZM TAMPER
E14-NN – RELAY BOARD RESPONSE TROUBLE
E15-NN – RF TRANSMITTER TAMPER
E16-NN – RF RECEIVER JAMMED
E17-NN – RF RECEIVER TAMPER
E18-NN – WIRELESS KEYFOB LOW BATTERY
E19-00 – USER PROGRAM MEMORY ERROR
E20-00 – DEALER PROGRAM MEMORY ERROR
E21-00 – SYSTEM SHUT DOWN
E22-NN – SENSOR WATCH ACTIVITY FAILURE
E23-00 – BURGLARY BUS FAILURE
E24-00 – SERVICE MESSAGE
E25-00 – COMMUNICATIONS FAILURE OVER INTERNET TCP/IP
E26-00 – SYSTEM GROUND FAULT
E27-00 – PRINTER FAILURE
E28-00 – FIRE BUS FAILURE
E29-00 – FIRE FBS BOARD TROUBLE
E30-NN – FIRE EZM AUX POWER FAILURE
E31-NN – FIRE EZM RESPONSE TROUBLE
E32-NN – FIRE KEYPAD RESPONSE TROUBLE
E33-NN – FIRE EZM TAMPER
E34-NN – FIRE KEYPAD TAMPER
E35-NN – SUPERVISORY RELAY TROUBLE
E36-NN – FIRE EZM GROUND FAULT
E37-NN – FIRE EZM A/C FAILURE
E38-NN – FIRE EZM LOW BATTERY
E39-00 – RF RECEIVER CAPACITY ERROR
E40-NN – RF DUAL TEC SELF TEST FAILURE
E41-00 – SYSTEM FIRE TROUBLE
E42-NN- CO ZONE TROUBLE
E51-00 – ALARM SUPERVISORY FAILURE
E54-00 – LOW BATTERY/AC FAIL FOR ACM #1
E55-00 – LOW BATTERY/AC FAIL FOR ACM #2
E56-00 – LOW BATTERY/AC FAIL FOR ACM #3
E57-00 – LOW BATTERY/AC FAIL FOR ACM #4
E58-00 – TELEMETRY TROUBLE
E59-00 – TELEMETRY FAILURE BETWEEN NL-MOD & PANEL
E66-00 – CLEAN ME SMOKE DETECTOR DIRTY
E99-00 – KEYPAD PANIC WIRE TROUBLE
Posted in [Miscellaneous]
Tags:
Date Added: 4/28/16
Voltage Troubleshooting Guide for the Gemini GEM-P816, GEM-P1632 and GEM-P1664 Control Panels.
Posted in [Tech Tips]
Tags:
Date Added: 2/10/17
Enable "Panel Access" to Energize an external relay connected to PGM2 ("Programmable Output 2").
Models: Gemini GEM-P816, GEM-P1632 & GEM-P1664 Control Panels.
Posted in [Tech Tips]
Tags:
Date Added: 9/12/18
How to program a "Test Timer" automatic test report (GEM-P1632 Control Panel).
Posted in [Video Tech Tips]
Tags:
Date Added: 1/10/19
How to control access through a special door (e.g. garage door, pool gate, storage room, etc.) using a keypad.
Posted in [Video Tech Tips]
Tags:
Date Added: 3/5/04
GEM-RP3DGTL Digital Keypad Programming and Installation Instructions.
Posted in [Installation Manuals]
Tags:
Date Added: 8/1/03
GEM-RP4RFC Digital Icon Keypad with Integral RF Receiver Programming and Installation Instructions.
Posted in [Installation Manuals]
Tags:
Date Added: 4/19/13
How use Quickloader to configure Primary Reporting via NetLink and Backup Reporting via StarLink Communicators with no landline.
Models: GEM-P816 and GEM-P1632 Control Panels (version 30M or greater) GEM-P3200, GEM-P9600 and GEM-X255 Control Panels (version 50 or greater) NL-MOD Network Communication Module NL-RCM Remote Control Module SLe-GSM and SL-1FD-T StarLink Communicators
Posted in [Tech Tips]
Tags:
Date Added: 3/25/16
Wiring Diagram detailing the integrated wiring connections using the Gemini GEM-P1632 control panel, the SLE-GSM Communicator, the SLE-DLEXT Extender Module and the SLE-SMTCHG Smart Charge Module.
Posted in [Tech Tips]
Tags:
Date Added: 6/18/20
Upgrading a GEM-P816 and GEM-P1632 V10D for iBridge Compatibility.
If you wish to use the iBridge IBR-ZREMOTE module, other iBridge system components or a StarLink Connect Communicator with an older GEM-P816 or GEM-P1632 control panel running firmware version 10D, this older control panel firmware must be upgraded to V31BA (or higher).
Posted in [Tech Notes]
Tags:
Date Added: 10/20/20
Download one WinZip file containing instructions and files for updating:
--GEM-X255, GEM-P9600 and GEM-P3200 control panel firmware;
--The NAPCO Control4 driver that functions with the NAPCO GEM-X255, GEM-P9600 and GEM-P3200 control panels and the NAPCO GEM-P816, GEM-P1632 and GEM-P1664 control panels with an IBR-ZREMOTE installed;
--The IBR-ZREMOTE firmware (both for the new IBR-ZREMOTE with a single Ethernet socket and for the legacy IBR-ZREMOTE with two Ethernet sockets);
--The NL-MODCONFIG software program.
Posted in [Software / Firmware]
Tags:
Date Added: 7/31/08
GEM-P1632 Control Panel/Communicator Programming Instructions With The "Classic" GEM-RP2ASe2, GEM-RP3DGTL, And GEM-RP4RFC/GEM-RP4C Keypads And The "K Series" GEM-K2AS, GEM-K3DGTL, And GEM-K4/GEM-K4RF Keypads (30B).
Posted in [Programming Manuals]
Tags:
Date Added: 7/31/08
GEM-P1632 Control Panel/Communicator Programming Instructions With The "Classic" GEM-RP1CAe2 Keypad And The "K Series" GEM-K1CA Keypad (Version 30B).
Posted in [Programming Manuals]
Tags:
Date Added: 12/11/06
GEM-P1632 Control Panel/Communicator Programming Instructions With The "Classic" GEM-RP2ASe2, GEM-RP3DGTL, And GEM-RP4RFC/GEM-RP4C Keypads And The "K Series" GEM-K2AS, GEM-K3DGTL, And GEM-K4/GEM-K4RF Keypads (Version 30B Or Later).
Posted in [Programming Manuals]
Tags:
Date Added: 12/11/06
GEM-P1632 Control Panel/Communicator Programming Instructions With The "Classic" GEM-RP1CAe2 Keypad And The "K Series" GEM-K1CA Keypad (Version 30B).
Posted in [Programming Manuals]
Tags:
Date Added: 10/1/03
GEM-P1632 Control Panel/Communicator Programming Instructions With The "Classic" GEM-RP2ASe2, GEM-RP3DGTL, And GEM-RP4RFC/GEM-RP4C Keypads And The "K Series" GEM-K2AS, GEM-K3DGTL, And GEM-K4/GEM-K4RF Keypads (Version 10).
Posted in [Programming Manuals]
Tags:
Date Added: 8/1/03
GEM-P1632 Control Panel/Communicator Programming Instructions With The "Classic" GEM-RP1CAe2 Keypad And The "K Series" GEM-K1CA Keypad (Version 10).
Posted in [Programming Manuals]
Tags:
Date Added: 5/2/23
How to "Cold Start" Napco Control Panels (Models GEM-P816, GEM-P1632, GEM-P1664, GEM-P3200, GEM-P9600 AND GEM-X255).
Posted in [Programming Manuals]
Tags:
Date Added: 7/26/23
Installation Instructions For GEM-EZM4/8 Zone Expansion Module For GEM-P816 & GEM-P1632 Control Panels.
Posted in [Installation Manuals]
Tags:
Date Added: 8/18/23
Model GEMINI GEM-P1632, GEM-P1632-Version2, GEM-P1632-Version 3, *GEMP1664, GEM-P816, GEM-P816-Version 2 and GEM-P816-Version 3 combination fire and burglary alarm control units. Refer to listee's data sheet for detailed product description and operational considerations.
Posted in [CSFM Listings]
Tags:
Date Added: 1/11/24
GEM-P1632 Control Panel/Communicator Installation Instructions (Version 31G). Conforms to UL 985.
Posted in [Installation Manuals]
Tags:
Date Added: 1/11/24
Tech Tip: Auto-Arming the GEM-P816, GEM-P1632, and GEM-P1664.
Posted in [Tech Tips]
Tags:
Date Added: 4/4/24
Tech Tip: Zone ANDing: Gemini Control Panels GEM-P816, GEM-P1632, and GEM-P1664.
With the GEM-P816, GEM-P1632, and GEM-P1664, up to 4 groups of two (or more) zones each can be "AND"ed whereby the system to go into alarm only if any two zones of the group are tripped within 2 minutes. The Zone ANDing feature is designed to afford redundant protection for certain devices, such as glass break detectors, PIRs, etc., that may show a tendency to false under certain conditions. For more information, see this Tech Tip.
Posted in [Tech Tips]
Tags:
