iBridge Quick Flow System Configuration Chart

Date Added: 1/23/14

iBridge Quick Flow System Configuration Chart.

This helpful graphical flow chart will help you select the modules needed for your iBridge installation.

When installing an IBR-ZREMOTE iBridge module, when is an ISEE-WAP required?

Date Added: 2/12/14

This Tech Tip details when an ISEE-WAP is required if installing an IBR-ZREMOTE iBridge module.

Using iBridge devices with a control panel with a keypad Compatibility Number programmed

Date Added: 3/27/14

Using iBridge devices with a control panel with a keypad Compatibility Number programmed.

Comparison Chart for IP Modules Interactive / Remote Services

Date Added: 9/22/14

Comparison Chart for IP Modules Interactive / Remote Services.  Includes:

• IBR-ZREMOTE (iBridge- Connected Home™)
• IREMOTE-MOD (iRemote Virtual Keypad)
• NL-MOD-UL (UL Listed)
• GEMC-NL-MOD (Commercial Fire Approved)

What to do if you are unable to see your iBridge IBR-ZREMOTE, iRemote-MOD or NL-MOD using the NL-MODCONFIG software (v3.0.3.0 or later)

Date Added: 1/15/15

What to do if you are unable to see your iBridge IBR-ZREMOTE, iRemote-MOD or NL-MOD using the NL-MODCONFIG software (v3.0.3.0 or later).

IBR-ZREMOTE Automation Interface Dealer Installation Instructions

Date Added: 10/1/14

IBR-ZREMOTE Automation Interface Dealer Installation Instructions.

This document identifies the hardware and software configuration changes needed to utilize the Automation Interface provided in the iBridge IBR-ZREMOTE Z-Wave Controller.

iBridge Messenger Notification Services Installation Instructions

Date Added: 6/8/15

iBridge Messenger Notification Services Installation Instructions.

All existing IBR-ZREMOTE installations may be upgraded for Messenger compatibility, as detailed in these installation instructions.

Using the IBR-ZREMOTE with a Verizon FiOS G1100 Router / Gateway

Date Added: 7/9/15

Using the IBR-ZREMOTE with a Verizon FiOS G1100 Router / Gateway.

Setting Up an IP Communicator & Using TCP/IP for Uploading and Downloading Quick Start Guide

Date Added: 3/6/15

Setting Up an IP Communicator & Using TCP/IP for Uploading and Downloading Quick Start Guide.

Models: IBR-ZREMOTE / iREMOTE-MOD / NL-MOD-UL.

Control4 (OS 2.6x to 2.7x) Interface Installation Instructions

Date Added: 11/4/14

Control4 (OS 2.6x to 2.7x) Interface Installation Instructions.

Note:  Does not apply to Control4 version 2.8x.

This document specifies the hardware, software and firmware requirements and driver installation instructions for customers wishing to interface their Napco control panels with Control4 automation controllers.

Click here for Napco's Control4 Certified driver for the Napco K Series "STAY / AWAY" keypads.

Click here Napco's Control4 Certified driver for the Napco "Classic" (INTERIOR, ON/OFF) keypads.

Control4 (OS 2.6x to 2.7x) Checklist Guide.

Date Added: 12/30/15

Control4 (OS 2.6x to 2.7x) Checklist Guide for IBR-ZREMOTE Integration.

Napco's Control4 (OS 2.6x to 2.7x) Driver (CLASSIC-INTERIOR Keypad) (Ver: 10060)

Date Added: 4/27/16

Napco's Control4 (OS 2.6x to 2.7x) Driver (CLASSIC-INTERIOR Keypad) (Ver: 10060).

Note:  This uncertified driver fixes keypad button layout on Control4 devices.  Note also that the driver incorrectly identifies itself as a STAY/AWAY driver but it displays the correct "Classic" keypad.

Using TCP/IP Communications for remote uploading and downloading of the control panel through the iBridge IBR-ZREMOTE

Date Added: 2/6/15

Using TCP/IP Communications for remote uploading and downloading of the control
panel through the iBridge IBR-ZREMOTE.

iBridge Suite Installation Instructions

Date Added: 2/4/13

iBridge™ Suite Installation Instructions:  Installing the IBR-ZREMOTE Z-Wave Controller, ISEE-WAP Wireless Access Point and the IBR-ITAB Wireless Touchscreen Tablet.

iBridge Suite Installation Instructions

Date Added: 9/18/17

iBridge Suite Installation Instructions:  Installing the IBR-ZREMOTE Z-Wave Controller, the ISEE-WAP Wireless Access Point and the IBR-ITAB Wireless Touchscreen Tablet.

iBridge IBR-ZREMOTE Quick Start

Date Added: 6/9/16

iBridge IBR-ZREMOTE Quick Start Guide.  This comprehensive guide describes the basic steps required to quickly get your new iBridge IBR-ZREMOTE up and running.

iBridge IBR-ZREMOTE Quick Start Guide

Date Added: 9/18/17

iBridge IBR-ZREMOTE Quick Start Guide.  This comprehensive guide describes the basic steps required to quickly get your new iBridge IBR-ZREMOTE up and running.

How to locally and manually update your IBR-ZREMOTE, iREMOTE-MOD and NL-MOD firmware using the NL-MODCONFIG software

Date Added: 2/7/18

How to locally and manually update your IBR-ZREMOTE, iREMOTE-MOD and NL-MOD firmware using the NL-MODCONFIG software:

How to update Daylight Saving Time in the iBridge IBR-ZREMOTE

Date Added: 3/7/19

Savant Automation Integration Supported Versions

Date Added: 3/21/19

NAPCO's IBR-ZREMOTE Z-Wave Controller currently integrates with a Savant Home Automation system, allowing a Savant system to take full advantage of NAPCO's security system and all of its associated features.  This Tech Tip provides a list of required firmware, equipment and control panels.

Unable to Connect to the iBridge IBR-ZREMOTE Remotely

Date Added: 7/23/19

If unable to connect to the iBridge IBR-ZREMOTE remotely.

Control4 / 3rd Party Home Automation Checklist

Date Added: 7/25/19

Control4 / 3rd Party Home Automation Checklist
To ensure you are able to communicate to your automation systems through an IBR-ZREMOTE, verify the following items in this Tech Tip.

Updating the IBR‐ZREMOTE, iRemote‐MOD, NL‐MOD and NL‐MOD-UL firmware using the NL-MODCONFIG software

Date Added: 8/22/19

How to update the IBR‐ZREMOTE, iRemote‐MOD, NL‐MOD and NL‐MOD-UL firmware using the NL-MODCONFIG software.

How to add a garage door controller to an iBridge IBR-ZREMOTE, StarLink Connect communicator or an iSecure system

Date Added: 1/30/20

Upgrading a GEM-P816 and GEM-P1632 V10D for iBridge Compatibility

Date Added: 6/18/20

Upgrading a GEM-P816 and GEM-P1632 V10D for iBridge Compatibility.

If you wish to use the iBridge IBR-ZREMOTE module, other iBridge system components or a StarLink Connect Communicator with an older GEM-P816 or GEM-P1632 control panel running firmware version 10D, this older control panel firmware must be upgraded to V31BA (or higher).

How to change your password in the iBridge Security System

Date Added: 7/9/20

How to update/change your password for an IBR-ZREMOTE only

Date Added: 6/29/17

How to update/change your password for an IBR-ZREMOTE Only:

3rd Party Automation Support- NAPCO IBR-ZREMOTE Software, Firmwares & Driver (LATEST)

Date Added: 10/20/20

Download one WinZip file containing instructions and files for updating:

--GEM-X255, GEM-P9600 and GEM-P3200 control panel firmware;

--The NAPCO Control4 driver that functions with the NAPCO GEM-X255, GEM-P9600 and GEM-P3200 control panels and the NAPCO GEM-P816, GEM-P1632 and GEM-P1664 control panels with an IBR-ZREMOTE installed;

--The IBR-ZREMOTE firmware (both for the new IBR-ZREMOTE with a single Ethernet socket and for the legacy IBR-ZREMOTE with two Ethernet sockets);

--The NL-MODCONFIG software program.

How to access the Configuration Web Interface for the IBR-ZREMOTE and IBR-ZREMOTE-W

Date Added: 12/9/20

How to access the Configuration Web Interface for the IBR-ZREMOTE and IBR-ZREMOTE-W:

Updating the NL-MOD, IBR-ZREMOTE, NL-MOD-UL or iREMOTE-MOD Firmware Using NL-MODCONFIG Software

Date Added: 9/23/21

Updating your NL-MOD, IBR-ZREMOTE, NL-MOD-UL or iREMOTE-MOD Firmware using the NL-MODCONFIG Software.

3-Way Z-Wave Device Association - Direct Range Considerations

Date Added: 10/16/14

3-Way Z-Wave Device Association - Direct Range considerations.

Programming the iBridge Suite with PCD-Windows Quickloader V6.1.1

Date Added: 4/29/13

Using PCD-Windows Quickloader V6.1.1 to program the iBridge Suite. Models: IBR-ZREMOTE Z-Wave Controller, ISEE-WAP Wireless Access Point and the IBR-ITAB Wireless Touchscreen Tablet.