SLE-LTEA-CFB, SLE-LTEA-CFB-PS, SLE-LTEA-CB, SLE-LTEA-CB-TF, SLE-LTEA, SLE-LTEA-8D and SLE-LTEA-FIRE firmware version LTEA Sole Path code 176.0.4 / 18.1

Date Added: 1/23/20

WARNING: This firmware file (version LTEA Sole Path code 176.0.4 / 18.1) is only for use with these StarLink models:

(See Installation Instructions WI2226 for these models):
SLE-LTEA-CFB
SLE-LTEA-CFB-PS
SLE-LTEA-CB
SLE-LTEA-CB-TF

(See Installation Instructions WI2227 for these models):
SLE-LTEA
SLE-LTEA-8D
SLE-LTEA-FIRE

----------------------------------------------

IMPORTANT: Do not install unless you first verify the existing firmware version of your radio in the StarLink Radio Management Center at www.napconoc.com: The "Checkins" screen, "Firmware Ver" column must read "176.0.x" (where x is any digit).

(Filename: "SLE-LTEA-TIVA-176_0_4_18_1_01_10_2020.bin").

Note: PCD-Windows Quickloader Software version 6.4.0 or later is required.

See WI2003 for complete step-by-step instructions.

Posted in [Software / Firmware]
Tags:

Installation Instructions for StarLink SLE-LTE Residential / Commercial Series Alarm Communicators

Date Added: 11/13/19

StarLink SLE-LTE Residential / Commercial Series Alarm Communicators.  Installation Instructions for models:

SLE-LTEV & SLE-LTEA
SLE-LTEV-8D & SLE-LTEA-8D
SLE-LTEV-FIRE & SLE-LTEA-FIRE

See this helpful Tech Tip:  How to configure the StarLink Fire Communicator Inputs for connecting to older legacy FACP systems.  If using an addressable input for radio supervision, this Tech Tip shows how to connect a Form C relay using the PGM1 and [V+] terminals.

Posted in [Installation Manuals]
Tags: