How to add a garage door controller to an iBridge IBR-ZREMOTE, StarLink Connect communicator or an iSecure system

Date Added: 1/30/20

iSecure Tamper Installation Instructions

Date Added: 1/31/20

iSecure Tamper Installation Instructions.

Two tamper monitoring type options:

Housing Separation Tamper
For stand-alone/table-top installations where a tamper alarm is desired upon the opening of the Hub enclosure.

Wall Removal Tamper
For a tamper alarm upon removal of the Hub housing from the wall.

How to connect your iSecure Hub to your customer's Wi-Fi wireless access point

Date Added: 2/25/20

This video shows you how to connect your iSecure Go-Anywhere Hub to your customer's Wi-Fi router (wireless access point).  These steps are required with the iSecure Kit 3 or when adding the IBR-TOUCH-WL to a Kit1 or Kit 2 installation.

How to replace the battery in the iSecure ISEC-DW-XMITTER Low Profile Window / Door Transmitter

Date Added: 3/10/20

This video shows you how to replace the battery in the iSecure ISEC-DW-XMITTER Window-Door transmitter:

How to enroll your iSecure security system

Date Added: 4/15/20

How to activate your iSecure Hub and perform the initial download using the programming website.

Setting up NAPCO iSecure and iBridge Systems for Text and Email Notifications

Date Added: 5/6/20

How to change your password in the iBridge Security System

Date Added: 7/9/20

How to create an event with your iBridge or iSecure security system

Date Added: 8/25/20

How to Adjust the iSecure Go-Anywhere Hub Voice Prompt Volume

Date Added: 10/5/20

How to Adjust the iSecure Go-Anywhere Hub Voice Prompt Volume:

Hardware installation and wiring for the iSecure ISEC-WL-MODULE Takeover Module

Date Added: 10/21/20

Hardware installation and wiring for the iSecure ISEC-WL-MODULE Takeover Module.

How to program the ISEC-WL-MODULE Takeover Module

Date Added: 11/4/20

How to program the ISEC-WL-MODULE Takeover Module:

How to register your iSecure Go-Anywhere Hub in the www.NAPCOComNet.com website

Date Added: 12/22/20

How to register your iSecure Go-Anywhere Hub in the www.NAPCOComNet.com website:

Using your iBridge App: Alarm System User's Guide

Date Added: 1/26/21

Using your iBridge App:  Alarm System User's Guide.  Also includes iSecure functionality, for iSecure Go-Anywhere Hub installations.  

How to Use Easy Connected Home Security & Automation Suite by NAPCO

Date Added: 4/27/21

iBridge® Consumer Video:  How to Use Easy Connected Home Security & Automation Suite by NAPCO

NAPCO iSecure Step-by-Step Getting Started Guide

Date Added: 3/5/20

NAPCO iSecure Step-by-Step Getting Started Guide.

This Quick-Start guide will guide you through ALL required installation steps, from system activation to configuring additional wireless peripherals and keypads.

How to change the EOLR value in the ISEC-WL-MOD Takeover Module

Date Added: 6/3/21

The end-of-line-resistor (EOLR) value may need to be changed depending on the control panel model you wish to "take over".

Transfer Existing iSecure Hub Programming to a New Replacement Account

Date Added: 6/16/21

How to transfer existing iSecure Hub programming to a new replacement account.

Using the iBridge app to set up an Auto Arming and Auto Disarming schedule for iSecure and iBridge Security Systems

Date Added: 6/24/21

Using the iBridge app to set up an Auto Arming and Auto Disarming schedule for iSecure and iBridge Security Systems:

iSecure App Overview

Date Added: 7/16/21

This video provides a basic overview of the iSecure app.

Gemini, iSecure and iBridge App "Private Label Branding"

Date Added: 7/7/22

Gemini, iSecure and iBridge App "Private Label Branding".

Dealers can now customize their subscribers' mobile apps with their dealer logos. Three custom images can be added:
• A "Website" logo image
• A "Mobile Device" logo image
• An "About Us" information image

Changing Door Z-Wave Lock User Codes

Date Added: 10/24/22

Changing Door Z-Wave Lock User Codes

Models: StarLink Connect Communicators and iSecure Go-Anywhere Hubs.

Tech Tip Description:  The Gemini and iSecure apps can be used to change StarLink Connect communicator and iSecure Go-Anywhere Hub Z-Wave lock codes.

Resetting the iSecure Control Panel to Factory Default Settings

Date Added: 7/27/23

Resetting the iSecure control panel back to its factory default settings ("Cold Start") will leave your iSecure panel with a blank program.

We STRONGLY recommend that before you begin, that you first back up your panel program to the iSecure Cloud Web Portal at www.iSecureByNapco.com and download the panel program back to the iSecure control panel after you finish the steps below.

IBR-TOUCH-WL Z-Wave User Guide for iSecure and iBridge

Date Added: 12/17/19

IBR-TOUCH-WL Z-Wave User Guide.  How to configure and use your iSecure Z-Wave Home Automation Network (OI409).

iSecure IBR-TOUCH-WL Wireless 7" Security Touchscreen Keypad User Guide

Date Added: 12/17/19

iSecure IBR-TOUCH-WL Wireless 7" Security Touchscreen Keypad User Guide for the iSecure system (OI413LF).

iSecure ISEC-WL-KEYPAD Wireless Battery-Operated Standard Keypad User Guide

Date Added: 12/17/19

iSecure ISEC-WL-KEYPAD Wireless Battery-Operated Standard Keypad User Guide for the iSecure system (OI400LF).

iSecure ISEC-WL-TOUCH Wireless Color 4.3" Security Touchscreen Keypad User Guide

Date Added: 12/17/19

iSecure ISEC-WL-TOUCH Wireless Color 4.3" Security Touchscreen Keypad User Guide for the iSecure system (OI401LF).

NAPCO iSecure Getting Started Guide

Date Added: 12/17/19

NAPCO iSecure Getting Started Guide (WI2350LF).

Click here for the full iSecure Installation & Programming Instructions (WI2240LF).

This video provides a basic overview of the iSecure app.

NAPCO iSecure Installation & Programming Instructions

Date Added: 6/8/21

NAPCO iSecure Security System Installation & Programming Instructions (WI2240).

This video provides a basic overview of the iSecure app.