Related Documents
- Keypad Programming for Local Downloading Only
- System Trouble E26 (Ground Fault) While Downloading
- GEM-P9600 Wiring Diagram CAD File
- GEM-X255 Wiring Diagram CAD File
- Gemini Home / Building Automation Development Specification
- Keypad Programming Made Simple
- Unable to delete User Codes using V70 Panels
- StarLink NOC Supervised Fire Input Programming
- Updating NAPCO Gemini Control Panel Firmware (Versions 70 and higher)
- How to Install an Auxiliary Power Supply
- How to Validate StarLink Email/Text Notifications
- Installation Quick Start / Checklist for Fire Alarm Control Panel DACT Connect Operation
- Is the SLE-CDMA-FIRE approved for commercial fire applications?
- Napco CDMA StarLink Spec Sheet
- NAPCO StarLink Commercial Fire Communicator Series AHJ Submittal Package
- New York City Certificate of Approval (SLE Series Communicator Models)
- Programming Open and Close Notifications through the SLe-GSM
- Sales/Marketing Spec Sheet: StarLink Commercial Fire Alarm Communicators: Standard & Mercantile Models
- Sales/Marketing Spec Sheet: StarLink SLE-Series Universal Cellular Alarm Communicators
- SLe-ANTEXT Antenna Extension Installation Instructions
- StarLink / Sur-Gard IP Reporting Advanced Options
- StarLink Remote Arm/Disarm mobile app will not arm panel
- StarLink SLE Series Quick Start Guide
- StarLink SLe-DLEXT Download Extender Module Installation Instructions
- StarLink SLe-SMTCHG Smart Charge Module Installation Instructions
- Uploading and Downloading Gemini Control Panels with the SLe-GSM
- Using a GEMC Burglary Control Panel with the "My Home StarLink" Remote Arm/Disarm Mobile App
- VOIP Communication broadband providers
- How to program your StarLink Commercial Fire communicator to report to a Sur-Gard IP receiver
- Permitted Test Timer range for your StarLink Communicator
- How to redirect (takeover) the alarm communications of a control panel with an unknown dealer code
- Downloading DSC Panels Using StarLink Connect (DSC DLS 5 Software)
- Downloading Honeywell Panels Using StarLink Connect (Honeywell Compass software)
- StarLink Connect Communicators: Downloading DSC and Honeywell Panels Getting Started Guide
- Sending Zone Descriptions to DSC Panels
- Before programming a VISTA-21iP control panel with StarLink Connect
- How to Set Up your Login in the "My Home StarLink" App
- 8 Blinks of the "D5" LED Indicate Trouble Conditions
- Programming a StarLink communicator to report Bosch Receivers
- School Doors: Annunciation with Gemini Control Panels
- Custom settings for Handshake/Kiss-off of Mircom Fire panels when connected to StarLink Fire Communicators
- Changing StarLink Contact Information in the NAPCO NOC Website
- Installing an Auxiliary Power Supply and Bonding the Negative to the Panel
- How to enable your FireLink FACP for remote downloading through the integral StarLink Communicator
- StarLink IP Reporting to Sur-Gard Non-Supervised Accounts
- Programming a StarLink communicator to report to Sur-Gard System 5 Receivers
- How to program a StarLink communicator to report in IP format to a Sur-Gard System 5 Receiver
- How to set the Date and Time on your Gemini Keypad
- Installation Quick Start / Checklist for Fire Alarm Control Panel DACT Connect Operation
- NAPCO NOC (StarLink Management Center) "Start template process" Feature
- UL 609: UL Local Burglar Alarm Units (Mercantile Premises)
- Summary of E356 signal (loss of central station polling) with StarLink communicators reporting by dial up / Telco
- Overview of the StarLink LTE Dual-Path Fire Communicator
- Programming NAPCO StarLink LTE Dual Path Fire Communicators
- Wiring an LTE Dual Path Communicator to the DACT of an FACP
- FACP Re-dialing Before Completing a Report to the Central Station
- StarLink Connect Residential Series SLE-CDMA-C / SLE-CDMA-Z Multi-Function Alarm Communicators: Quick Start Guide
- Incomplete registration of a StarLink Communicator (unit does not appear as registered in the ComNet / NOC websites)
- How to program a static IP Address into your StarLink Dual Path Communicator
- Set Up Input Reporting for StarLink LTE Dual Path Fire Communicators
- Set Up Input Reporting for StarLink LTE Dual Path Fire Communicators Reporting to IP Receiver
- How to program your StarLink Commercial Fire or StarLink Connect communicator using the StarLink SLE Wi-Fi module to connect to a 2.4GHz wireless router
- Adding Napco NOC Notifications: User's Guide
- Connecting a StarLink Fire Communicator to an FACP with Two Telco Connections
- Ensuring DSC and Ademco control panels have the correct firmware for use with the StarLink Connect Communicators
- FACP with StarLink Communicator: Using Two 9SLE10KHARN Wire Harnesses for Two N/O or N/C Trips
- Changing your StarLink GSM Communicator Subscriber Information
- How to access the StarLink Management Center from your smartphone
- How to create a second TCP/IP port in the Compass software when using a combination of Honeywell AlarmNet and Napco StarLink Communicators
- How to program the StarLink communicator for the control panel manufacturer (Napco, Honeywell or DSC)
- How to set up your StarLink Dual Path Commercial Fire or Burglary Communicator for Dual Path Reporting.
- How to suspend or terminate a StarLink communicator using the NapcoComnet.com website
- How to update StarLink Communicator firmware
- How to use the "Start Template Process" utility in the StarLink Management Center (Napco NOC)
- How to wire the StarLink Fire Communicator PGM1 Trouble output to an SLC module or to a FACP with isolated ground using a low-current fire-rated relay
- Installation Quick Start / Checklist for Fire Alarm Control Panel DACT Connect Operation with FACP to Communicator Wiring Protected in Conduit
- Installation Quick Start / Checklist for Triggering StarLink Communicator Inputs from FACP Relays
- IP / Dual Path Reporting with a StarLink Connect Communicator (Hardwired LAN Connection, cellular as backup)
- IP / Dual Path Reporting with a StarLink Connect Communicator (Hardwired LAN Connection, dial-up reporting as backup)
- IP / Dual Path Reporting with a StarLink Connect Communicator (Wireless LAN Connection)
- IP / Dual Path Reporting with a StarLink Dual Path Communicator (Hardwired LAN Connection)
- IP / Dual Path Reporting with a StarLink Dual Path Communicator (Wireless LAN Connection)
- Napco StarLink Commercial Fire & Burglary Communicators: How to wire Input 2 and/or Input 3 for Supervised Fire Alarm and Trouble
- Path Supervision with a StarLink Dual Path or StarLink Connect Communicator
- Programming a DSC Power Series Control Panel with DLS5 Software and a StarLink Connect Communicator
- Programming a Honeywell Vista Control Panel with Compass and a StarLink Connect Communicator
- Programming a StarLink Communicator to Report to a Bosch Receiver via TCP/IP
- Programming Communicator Generated Signals to the Central Station
- SLE Communicator and StarLink NOC Reporting Codes and Restores
- StarLink Commercial Fire Communicator Connections
- StarLink Commercial Fire Communicator Quick Start Checklists: For FACP DACT Connect Operation or Triggering Communicator Inputs from FACP Relays
- StarLink Commercial Communicator Series: Summary of Service Plans
- StarLink Commercial Communicator Supervision with Sur-Gard
- StarLink Connect Communicator Settings for Each Panel Manufacturer
- StarLink Communicator Management Center (www.NapcoNOC.com) Clipboard Features
- Tip / Ring Fault with a StarLink Dual Path or StarLink Connect Communicator
- Call Waiting Prefix Numbers Causing Interference
- Upgrading a GEM-P816 and GEM-P1632 V10D for iBridge Compatibility
- UL Listing - Local Alarm Units
- Easy Menu Driven Keypad Programming
- Connecting the SLE Fire Communicator to Fire Alarm Control Panels that include two Telco jacks
- Required NOC Programming for Commercial Fire Accounts
- How to Program a Managed Test Timer for a StarLink LTE Communicator
- Micro 2 Firmware for the StarLink Connect Communicators, (DSC & Honeywell)
- How to register a new StarLink Communicator
- Using a NAPCO StarLink Communicator with DSC MAXSYS PC4020 Control Panels
- Re-wiring a StarLink Dual Path Fire Communicator with the New Telco 2 JP2 Trouble Option
- StarLink SLE Commercial FirstNet FNI Series SLE-FNI-FIRE Dual-Path Alarm Communicator Installation Instructions
- StarLink SLE Commercial FirstNet FNI Series Dual-Path Alarm Communicators, Installation Instructions
- How to Change StarLink Communicator Subscriber Information
- Sur-Gard IP Receiver & NAPCO StarLink Integration Documents
- Three steps to becoming a NAPCO Dealer for Cellular and IP Products
- Remove Jumper JP2: Monitoring the StarLink Communicator Power Supply to Trigger Local FACP Trouble
- How to send a test signal from your StarLink communicator to the central station
- StarLink Connect Virtual Keypad Operations & Remote Service Calls with Napco, Honeywell & DSC Control Panels (Feature Matrix)
- NAPCO StarLink Communicator Compliance Summary
- Setting Text and Email Notifications for Fire Communicators
- StarLink UCA app icon does not connect (does not turn green) for Compass or DLS5
- StarLink Communicators Reporting to IP Receiver Using Inputs to Trip Test Timer
- System Sensor Cosmod2 and Cosmod4: Gemini Control Panels
- NAPCO StarLink Commercial Fire Communicator SLE-LTEV-CFB-PS & SLE-LTEA-CFB-PS (Sole Path) Dial Capture Wiring Diagram (PDF Format)
- NAPCO StarLink Commercial Fire Communicator SLE-LTEV-FIRE & SLE-LTEA-FIRE (Sole Path) Communicator Input Wiring Diagram (DWG format)
- NAPCO StarLink Commercial Fire Communicator SLE-LTEV-FIRE & SLE-LTEA-FIRE (Sole Path) Communicator Input Wiring Diagram (PDF format)
- NAPCO StarLink Commercial Fire Communicator SLE-LTEV-CFB-PS & SLE-LTEA-CFB-PS (Sole Path) Communicator Input Wiring Diagram (DWG format)
- NAPCO StarLink Commercial Fire Communicator SLE-LTEV-CFB-PS & SLE-LTEA-CFB-PS (Sole Path) Communicator Input Wiring Diagram (PDF format)
- Input False Trouble Upon Check In
- Configuring the StarLink Fire Communicator Inputs for connecting to older legacy FACP systems
- SLe-GSM Firmware Update Instructions (WI2003B)
- StarLink models "SLe-GSM-3/4G", "SLe-GSM-8D-3/4G", "SLE-CDMA" and "SLE-CDMA-8D" Communicator Communicator Installation Instructions
- StarLink Fire Communicator Activation Guide
- Tech Tip: Simplified Gemini User's Guide
- NAPCO StarLink CDMA Recycling Program
- Unable to Enroll Z-Wave Devices
- UL 985: UL Household Fire Alarm System Units, System (Residential Fire)
- LAFD Letter of Approval (NAPCO StarLink SLE and SLE-LTE Commercial Fire Alarm Communicators
- UL 864: (10th Edition) UL Control Unit Accessories, System
- How to Upgrade your Verizon Dual Path Communicator to Support Modem Formats
- StarLink Template Feature
- Using the NAPCO NOC Firmware Update Feature
- Firmware for the StarLink MAXA / MAXV Sole Path Communicators (221.0.0 / 11.1)
- Wiring and Programming the DMP (Digital Monitoring Products) XT30 / XT50 Security Control Panels for Remote Control of Napco SLE Series Communicators
- Programming for Mircom Control Panels for StarLink Fire Communicators
- Resetting your StarLink Communicator
- Loss of Central Polling
- StarLink Communicator Handshake Failed; Not Indicated in Signal Log
- Three steps needed to install our dealer-registered products
- Signals Not Sent Over the POTS ("Plain Old Telephone System") Landline
- "Copy from Clipboard" Feature at the StarLink Communicator Programming at the NapcoNOC.com Website
- Nonstop 373 Troubles
- Testing a Radio Signal from the StarLink Communicator to the Central Station
- Release and Transfer of StarLink Subscriber Accounts Form
- NAPCO StarLink Fire Automatic Supervision
- NAPCO StarLink LTE Commercial Fire Communicator Series AHJ Submittal Package
- iBridge App Displays a Blank Screen or Another Account's Keypad
- Getting Started with NAPCO StarLink Fire Communicators
- FireLink Programming Website Overview
- AHJ Primer Series - Failure To Complete A Fire Signal Transmission - NFPA 72 - 26.6.3.3
- Test Timers and NFPA 72 Requirements - DACT Connected vs Triggered Inputs
- Connecting Two StarLink Fire Communicators to the same FACP with Self-Supervision
- StarLink SLE-ANT Remote Antenna Kit LMR300 Cable Specifications
- StarLink SLE-ANT Remote Antenna Kit LMR400 Cable Specifications
- IP Test Timer Reporting: Communicator Trigger Inputs
- GEM-P801 Documentation Package
- How to suppress a runaway signal or put a signal "on test"
- Compatible Control Panel Accessories with Gemini Control Panel Models GEM-P801 and GEM-P800
- Firmware for the StarLink MAX2 Communicators (226.151.30 / 0.6)
- StarLink Fire MAX2 Service Plan Overview
- Intertek ETL Certifications for CAN-ULC
- Intertek ETL Certifications for UL
- Adjust LCD Keypad Backlight Brightness
- Firmware for the StarLink MAX2 Communicators (226.100.31 / 3.1)
- StarLink Fire Dual Path Communicator: Jumper JP2
- StarLink SLE-LTE Documentation Package
- Documentation Package for the StarLink Commercial SLE-MAXVI-FIRE & SLE-MAXAI-FIRE Sole/Dual-Path Alarm Communicators
- Documentation package for the SLE-MAXVI-CFB & SLE-MAXAI-CFB, SLE-MAXVI-CFBPS & SLE-MAXAI-CFBPS Alarm Communicators
- StarLink Commercial SLE-MAXVI-FIRE & SLE-MAXAI-FIRE Sole/Dual-Path Alarm Communicators: Installation Instructions
- SLE-FIRE-VR Control Panel Voltage Drop Kit Installation Instructions
- StarLink Connect Residential Series SLE-CDMA-C / SLE-CDMA-Z Multi-Function Alarm Communicators: Installation Instructions
- Documentation Package for ComNet / StarLink
- SLE Series Communicator Reporting & PCD-Windows Quickloader Setup and Configuration Instructions
- UL 1023: UL Household Burglary Alarm System Units, System
- Radio Management Center (NAPCO NOC) -- System Time
- StarLink SLE-MAXA & SLE-MAXV Installation Instructions
- StarLink SLE-MAX2-DEMO Operating Instructions
- SLE-MAX2-DEMO Quick Start Guide
- LAFD NFPA 72 Sole Path Communicator Approval (NAPCO StarLink SLE-MAX2)
- Using External Power Supplies with the Gemini GEM Control Panels
- Using StarLink Connect & Fire Communicators with Gemini C-Series (GEMC) Control Panels
UL 1610: Central Station Alarm Units
Document Type: UL Listings
Product Type:
Accessories
Publication Date: 4/27/22
| File Size: 204.6KB
File Name:
AMCX.S2576 - Central-station Alarm Units _ UL Product iQ.pdf
Tags:
StarLink
, Gemini
Description
UL 1610 Central-station Alarm Units, UL file AMCX.S2576.
Last Updated on 2022-04-27
FAQs
View our most commonly asked questions. Click Here