Home > Napco Access Pro > Software / Firmware ⚙️ > Lantronix Device Installer

Related Documents

Tags

ArchiTech CA3000 DL-Windows FireLink GEM-P1632 GEM-P1664 GEM-P3200 GEM-P816 GEM-P9600 GEM-RP1CAe2 GEM-X255 GEMC IBR-ZREMOTE Networx PCD-Windows Prima Quickloader SLe-GSM StarLink StarLink Connect Trilogy accelaterm cardaccess 3000 iBridge iSeeVideo

Lantronix Device Installer

Document Type: Software / Firmware ⚙️
Product Type: Ethernet Adapters/Communication
Publication Date: 4/1/22 |
Tags: device installer , deviceinstaller , lantronix , Lantronix Xport , xport

Description

The 'Lantronix Device Installer' is exclusively utilized for locating and programming X-Port Devices Only. Moreover, the program serves to discover IP addresses within the same local network and program supported Continental Access Controllers and Wireless Networx GEN3 Gateways.  

 

Instructions on how to program Lantronix devices Click Here

 

Supported Controllers / Gateways

Accelaterm (CICP2800 w/ CICP18ACCNETBD)

Accelerator (CICP1800 w/ CICP18ACCNETBD)

Super Two (CICP1300 w/ CICP1300NET)

Wireless Networx GEN3 Gateways / MVP-IM3-80211 / MVP-IM3-POE

 

Where to go to Install the program: 

If using CA4K, inside the CA4K downloaded zip folder, navigate to the "Drivers" folder and open the folder called "Device Installer" and then run the Device Installer *.exe to install

or Visit Lantronix Website directly to download the latest version

Latest Version of Device Installer | Lantronix