FAQs
Does the "FFFF" mode allow you to enter the badge number and facility code into the keypad?
YES...
The "FFFF" mode will allow you to enter the badge number or facility Code/Badge number directly into the keypad.
Here are the steps:
1)Enable Keypad
2) In the Common Code box, enter FFFF.
3) Leave the Card and Pin schedule at Not Used.
4) Configure the Common Code schedule for a 24X7 schedule.
If the facility code in Personnel is configured for 1 and the badge number is 3456, on the keypad you type the following:
*013456#
Note: The "01" is for the facility code setting in personnel and the "3456" is the badge number.
VERY IMPORTANT: There are some keypads. that allow you to hard code the facility code into the keypad. If you do that, then you would only enter 3456#. The facility code would be sent automatically with the keypad data.