FAQs
Is there an easy way to sequentially add a 'block' of proximity cards into DL-Windows?
When adding proximity cards to DL-Windows, a Sequential Add utility is available if you have a block of cards you wish to add in sequence. For example, card numbers 1093600 through 1093700 with all other card attributes (Card Type, Card Number and Facility code) identical throughout the sequence. Use the Sequential Add utility as follows:
- Select the Lock Profile.
- Select + Add Card.
- Type the starting Card Code, check Sequential Add and click OK.
- Type the number of cards you wish to add, then click OK.
- The system will add the card numbers into the User List (in the Global Users screen) and you can begin adding the new cards to the Lock Profiles.
Test Card Operation (Optional): Before adding names and other personal User Information, you can test the added cards by sending the Lock Profile to a selected lock in the account, then present some of the cards to the lock proximity reader. Later, add the personal information to each card User and re-send the Lock Profiles to the selected locks.