FAQs
How do I set the GEM-TOUCH keypad address?
To set the GEM-TOUCH keypad address:
1. Move the control panel configuration jumper from NORMAL to KEYPAD CONFIGURE.
2. Confirm the keypad display reads, "0 OUT OF SYSTEM" (at the top of the display).
3. Tap Setup ("gear" icon).
4. Tap 1 1 1 2 3 ENTER (the Keypad Configuration Code).
5. Tap Dealer KP Config.
6. The current address number is displayed under KP Config. To change the keypad address, tap the KP Config button and tap the new address number (1, 2, 3, etc.), then tap ENTER to save.
7. Tap Save and tap Exit to finish.